DITO & SITO ITO Sensor Process | Ever Glory

In-House Touch Sensor Manufacturing

DITO and SITO Capacitive Touch Sensor Processes

Ever Glory manufactures patterned ITO glass sensors for customized projected capacitive touch products. DITO and SITO architectures are selected according to product size, electrode layout, routing requirements, optical performance and manufacturing feasibility.

DOUBLE-SIDED ITO

DITO Sensor Process

The X- and Y-axis sensing electrodes are patterned on opposite sides of the glass substrate.

Representative Layer Structure

  1. Upper passivation layer
  2. Upper silver-paste routing
  3. Upper insulation layer
  4. Upper patterned ITO electrode
  5. Soda-lime glass substrate Sensor carrier material
  6. Lower patterned ITO electrode
  7. Lower insulation layer
  8. Lower silver-paste routing
  9. Lower passivation layer

Manufacturing Sequence

  1. ITO Glass Cleaning Remove surface particles and contamination before patterning.
  2. Etching-Paste Screen Printing Apply the defined pattern to the first side of the ITO glass.
  3. ITO Pattern Etching Form the required sensing-electrode geometry.
  4. Etching-Paste Cleaning Remove residual process materials after pattern formation.
  5. Protection-Layer Printing Apply protection according to the approved sensor design.
  6. Silver-Paste Circuit Printing Print peripheral traces and connection routing.
  7. Laser Trimming or Pattern Definition Refine specified routing or electrode features when required.
  8. Insulation and Passivation Processing Protect conductive routing and defined crossing areas.
  9. Opposite-Side Processing Repeat the specified electrode process on the second side.
SINGLE-SIDED ITO

SITO Sensor Process

Sensing electrodes and multilayer routing are formed on one side of the glass substrate.

Representative Layer Structure

  1. Passivation layer Representative thickness: 2.0 μm
  2. Metal routing layer Representative structure: Mo/Al/Mo
  3. Insulation layer Representative material: SiO₂
  4. Patterned ITO sensing layer
  5. Optical matching layer Representative SiO₂-based optical layer
  6. Soda-lime glass substrate Sensor carrier material

Manufacturing Sequence

  1. Incoming Glass Inspection Check incoming substrate dimensions and surface condition.
  2. IM1 and ITO1 Sputtering Deposit the optical-matching and first ITO layers.
  3. ITO1 Photolithography and Etching Form the first electrode pattern.
  4. OC1 Process Apply the specified intermediate process layer.
  5. ITO2 Sputtering Deposit the second specified conductive layer.
  6. ITO2 Photolithography and Etching Form the second electrode pattern.
  7. Metal Sputtering Deposit the metal routing structure.
  8. Metal Photolithography and Etching Define fine conductive traces and routing.
  9. IM2 Sputtering and Patterning Apply and pattern the specified secondary layer.
  10. Passivation Protect electrode and metal-routing areas.
  11. Visual Inspection and Screen Printing Inspect the patterned sensor and apply specified printed features.
  12. Glass Cutting Cut the processed substrate to the approved sensor dimensions.

DITO vs. SITO Sensor Architecture

Final architecture is confirmed through electrical design and design-for-manufacturing review.

Selection Factor DITO Sensor SITO Sensor
ITO arrangement ITO patterns on both sides of the glass Multilayer electrode structure on one side
Electrode routing X- and Y-axis electrodes separated by the glass substrate Electrodes and routing integrated through a multilayer process
Representative processes Screen printing, etching, silver paste, insulation and passivation Sputtering, photolithography, etching, metal routing and passivation
Design selection Determined by sensor size, channel count, line resistance, optical requirements, touch-controller design and production feasibility.
LCD integration No LCD included No LCD included

Key Manufacturing Controls

Critical parameters are controlled according to the approved sensor drawing and project inspection standard.

Pattern Accuracy

Electrode geometry, trace width, spacing and alignment are checked against the approved design.

Electrical Performance

ITO continuity, channel resistance, insulation and circuit connection are inspected.

Surface Quality

Glass scratches, particles, pinholes, contamination and visual defects are controlled.

Process Traceability

Material batches, process records and inspection results are retained according to project requirements.

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
Phone *
Email *
Company Name *
Application *
Message *