Reliability Testing & Inspection Equipment | Ever Glory

Reliability Verification & Quality Control

Reliability Testing and Inspection Equipment

Ever Glory uses environmental test chambers and inspection instruments to evaluate customized touch panels without LCD and touch display modules with LCD. Test conditions and acceptance criteria are defined according to the approved project specification.

Environmental Reliability Tests

Project-defined testing helps evaluate material, bonding, touch-function and structural stability under specified environmental conditions.

01

High- and Low-Temperature Test

Temperature range−40°C to +70°C
Relative humidity90% / 60%
Test duration72 hours
02

Constant Temperature and Humidity Test

Temperature85°C
Relative humidity85% RH
Test duration72 hours
03

Rapid Temperature Change Test

Temperature transition+70°C to −20°C
Temperature change rate10°C/min
Test duration72 hours
04

UV Accelerated Weathering Test

Temperature rangeRT +10°C to +70°C
Relative humidity90% RH
UV irradiance2.0 W/m² at 340 nm
Test duration48 hours

Inspection and Measurement Equipment

Inspection equipment supports surface-treatment verification, glass-strength evaluation, electrical analysis and detailed appearance inspection.

Water Contact Angle Tester

Surface-treatment inspection
Measurement range 0–180°
Accuracy ±0.10°
Repeatability ±0.10°
Test method Sessile-drop/static contact angle

Oscilloscope

Electrical-signal analysis
Bandwidth 200 MHz
Analog channels 2 channels
Sampling rate 1 GSa/s
Storage depth 12 Mpts

Surface Stress Tester

Strengthened-glass verification
Stress range 0–1,000 MPa
Stress accuracy ±20 MPa
Stress-layer depth 0–200 μm
Depth accuracy ±5 μm
Light source LED, 590 ±2 nm

Inspection Microscope

Detailed appearance inspection
Eyepiece angle 30° tilt
Interpupillary adjustment 53–75 mm
Fine adjustment scale 0.8 μm

Verification Coverage

  • Cover-glass surface treatment and strengthening
  • OCA lamination and bonding stability
  • Touch response and communication stability
  • FPC, connector and electrical-signal inspection
  • Appearance defects and contamination inspection

Project Applications

  • Industrial control equipment
  • Outdoor and high-brightness equipment
  • Self-service terminals and kiosks
  • Medical equipment interfaces
  • Automotive-related touch projects

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
Phone *
Email *
Company Name *
Application *
Message *