Optical Bonding Process | OCA SCA OCR | Ever Glory

In-House Lamination Capability

Optical Bonding Process for Custom Touch Products

Ever Glory supports OCA, SCA and OCR bonding for customized capacitive touch panels and touch display modules. The bonding material and process are selected according to the product structure, size, optical requirements, operating environment and reliability targets.

Two Different Product Structures

Optical bonding can be used at two assembly stages. Whether an LCD is included determines the final product type.

WITHOUT LCD

Capacitive Touch Panel

Touch-input component only

Cover Glass Customized shape, printing, holes and surface treatment
OCA or SCA Optical adhesive between cover glass and touch sensor
Capacitive Touch Sensor ITO sensing layer and FPC connection
Final Product: Touch Panel Without LCD Provides touch input but cannot display an image
WITH LCD

Touch Display Module

Integrated touch and display assembly

Cover Glass Customized front cover and printed border
OCA or SCA Cover-glass-to-sensor bonding
Capacitive Touch Sensor Touch-sensing layer with FPC
LCD integration starts here
OCA or OCR Touch-panel-to-LCD optical bonding
LCD Module LCD panel, backlight and display interface
Final Product: Touch Display Module With LCD Provides both touch input and image display

Selection guidance: Choose a touch panel without LCD when the equipment manufacturer already has a specified display. Choose a touch display module with LCD when a complete, integrated touch-and-display assembly is required.

OCA, SCA and OCR Bonding Methods

The three bonding methods use different material forms, equipment, pressure conditions and curing processes.

OCA

Optically Clear Adhesive

Solid transparent adhesive film used for controlled optical lamination.

  1. Surface Cleaning Remove particles and contamination from the bonding surfaces.
  2. First Lamination Apply the OCA film to the approved component.
  3. Second Lamination Align and laminate the cover glass, sensor or LCD component.
  4. Vacuum Bonding Complete lamination under controlled vacuum conditions.
  5. Defoaming and Inspection Inspect bubbles, particles, alignment and adhesive overflow.
SCA

Solid Clear Adhesive

Solid optical adhesive processed through lamination, pressure and curing.

  1. Surface Cleaning Prepare the cover glass, sensor and bonding surfaces.
  2. First Lamination Apply the solid adhesive under controlled alignment.
  3. Second Lamination Assemble the corresponding touch or display component.
  4. Hot-Press Defoaming Apply controlled pressure and temperature to reduce trapped air.
  5. UV Curing and Inspection Complete curing and inspect the bonded assembly.
OCR

Optically Clear Resin

Liquid optical resin used for full-area or controlled gap filling.

  1. Dam Formation Define and control the resin-bonding area.
  2. Resin Dispensing or Gap Filling Apply the specified resin quantity using the approved path.
  3. Alignment and Bonding Align the touch panel and LCD while controlling resin flow.
  4. Thermal or Project-Defined Curing Cure the resin according to the approved material process.
  5. Final Inspection Check voids, overflow, contamination and optical appearance.

Bonding Process Selection Reference

Final material selection requires DFM review and sample validation.

Comparison OCA SCA OCR
Material form Solid adhesive film Solid clear adhesive Liquid optical resin
Representative process Lamination, vacuum bonding and defoaming Lamination, hot pressing and curing Dispensing, bonding and curing
Typical bonding position Cover-to-sensor or touch-panel-to-LCD Cover-to-sensor Touch-panel-to-LCD or controlled gap filling
Project review factors Product size, bonding gap, cover-glass thickness, sensor structure, LCD type, operating temperature, optical targets and reliability requirements.

Engineering Benefits

  • Reduces the air gap between the touch panel and LCD
  • Reduces reflections at internal optical interfaces
  • Supports improved readability under ambient light
  • Reduces the risk of internal dust and condensation
  • Supports an integrated touch-and-display structure

Key Process Controls

  • Surface cleanliness and plasma treatment when specified
  • Adhesive model, thickness and batch traceability
  • Touch-sensor and LCD alignment
  • Bonding pressure, temperature, vacuum and curing parameters
  • Bubbles, voids, particles, overflow and Newton-ring inspection
  • Touch function, display function and reliability verification

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
Phone *
Email *
Company Name *
Application *
Message *